Predator NX
Specifications:
Length: 55.7"
Height: 18.2"
Tail Rotor Diameter: 11.2"
Engine Size: 90
Bearings: 55
Predator 90 Max NX
90 Size Nitro Powered RC Helicopter
Part# CN1302 (1:8.18 Ratio) / CN1302B (1:7.66 Ratio)
Price $895.95
They don't call it the Predator for nothing! Expect crisp controls and wicked power. The Predator is nothing less than a competition winning monster machine!
NX (Next Generation) Series of Predators Features:
With numerous upgrades and improvements to its critical parts, the NX Predators are more durable and rigid than ever. These developments are designed to make the helicopter perform better under any application.
Wide supports of main blade grip arms for increased durability.
1-piece mold rotor head yoke for increased durability. Yoke has ends streamlined to the Blade Grips.
Lightweight flybar paddles designed to eliminate balooning effect on fast forward flights giving you a locked in feel.
Super heavy duty cooling fan hub to prevent clutch alignment issues from possible warping of the material.
Solid and wider clutch shoes for better holding power.
Wide, heavy duty clutch bell for additional grip.
All metal, lightweight swashplate with Teflon Coated Center Ball.
Six bolt mounts on the front tail transmission case for a strong grip of the tailboom.
Thick construction of tail gearbox. It has tail output shaft supports for increased rigidity.
Lightweight tail blade grips has additional supports for Increased rigidity.
Aerodynamic pitch plate arms of the tail blade grips.
Standard Features:
Rotor Head
Machined aluminum center hub.
Full bearing supported and adjustable seesaw for FAI or 3D.
Adjustable bell-hiller ratio allows tuning for preferred cyclic response.
10mm Hardened main shaft
Aluminum head button included
and much more!!!
Control System
eCCPM 3 servos system with bellcranks to absorb rotor head vibration.
Electronic CCPM (cyclic collective pitch mixing) at 120 or 140 orientation.
Push-pull dual bearing supported roll cyclic bellcranks.
Precision machined dual ball bearing CCPM swashplate for 120 or 140 setup.
24° Collective pitch range.
and much more!!!
Drive Train
Included constant tail drive unit that drives the tail during autorotations.
Hardened 10 tooth main drive gear.
Heavy duty clutch provides flywheel effect for smooth idle
Efficient cooling fan with location holes for governor magnets.
Machined heavy-duty 14mm delrin gear for heavy loads.
and much more!!!
Canopy
High gloss high quality white gelcoated epoxy fiberglass canopy.
Embedded carbon strip reinforcement
Pre-drilled mounting holes with rubber grommets.
Tinted high gloss windshield.
Pre-cut swashplate, main shaft and starting shaft holes.
and much more!!!
Main Mechanics
Rigid stacked modular aluminum mainframe design with continuous machined lower bearing block assembly.
Large 22 oz fuel tank for long engine run time.
Separate front and rear frames permit engine removal with muffler and carburetor attached.
Rear crossbrace and bottom frame plate provides absolute rigidity in all axis.
Tough, low-profile and flexible landing gear.
and much more!!!
Tail
Large hardened heavy-duty metal tail gears.
Rear rudder servo mount for direct and smooth tail control.
Dual carbon fiber support struts and support bridge included.
Carbon Fiber horizontal and vertical fin set.
RotorTech 105mm carbon fiber tail blades.
and much more!!!
Just Provide (Items required to fly but not included):
1x 90 size nitro engine
1x Muffler (tuned recommended)
1x 680mm-720mm main blades (720mm fiberglass or carbon fiber for FAI, 710mm carbon fiber for 3D recommended)
5x Sport line or better servos
1x Heading hold/lock gyro
1x 7-channel or better Radio Transmitter capable of 120 degree eCCPM mixing with Transmitter Battery, and Transmitter Battery Charger.
1x Transmitter and receiver crystal set
1x Governor (optional but highly recommended)
1x Nitro Gasoline
1x Starting Equipment
1x RC helicopter tools
More Photo:
Carbon Version
kyhunter Hobby
S
HELICOPTER
HELICOPTER PARTS
RADIOS & RECEIVERS
BOATS
Scale Ships
Submarines
Car/Trucks
Cars
Send your photo of your project and we will post it on our customer photos page
Illuminated Cockpit Panel
Phoenix R/C Flight Simulator 2.5 w/DX5e
